New vibrating head:Head is devided into 2 piece configuration. Head cap can be separately replaced with new one. If is not needed to replace with all head case complete. It reduces maintenance cost for replacement in the event. There are still compatibility between new head cap with case (B-type) and current head case (A-type) as a set.

 

 

FX-40RB/FU-161

FX-50RB

 

[Specification for High Cycle Internal Concrete Vibrator]

Model	Vib.head dia. x length	Rubber Hose	Voltage	Cycle	Input (KVA)	Amplitude	Vibration	Cable Length	Weight(kg) 4m or 6m
FX-30B	32 x 396mm	4 or 6m	48V	200/ 240Hz	0.33	1.8mm	200Hz/240Hz (12,000/ 14,400V.P.M)	15m	9.1/10.3
FX-40B	43 x 396mm	4 or 6m	48V	200/ 240Hz	0.49	1.5mm	200Hz/240Hz (12,000/ 14,400V.P.M)	15m	11.4/13.3
FX-50B	52 x 413mm	4 or 6m	48V	200/ 240Hz	0.79	1.9mm	200Hz/240Hz (12,000/ 14,400V.P.M)	15m	14.5/16.0
FX-60B	61 x 485mm	4 or 6m	48V	200/ 240Hz	1.5	2.0mm	200Hz/240Hz (12,000/ 14,400V.P.M)	15m	17.9/19.9
FXB-30B	32 x 1.728mm		48V	200/ 240Hz	0.33	1.8mm	200Hz/240Hz (12,000/ 14,400V.P.M)		11.0
FXB-40B	43 x 1.792mm		48V	200/ 240Hz	0.49	1.5mm	200Hz/240Hz (12,000/ 14,400V.P.M)		15.0

 

 

FU-161	FV-301

 

[Specification for High Cycle Internal Concrete Vibrator]

Model	Dimensions	input (V)	Input (A)	Input (KVA)	Input (Hz)	Output (V)	Output (A)	Output (KVA)	Output (Hz)	Receptacles	Weight (kg)
FU-161	L 324mm W 240mm H 250mm	100 Single Phase	20	2.0	50/60	48 Three Phase	19.2	1.6	240	2	7.8
FV-301	L 324mm W 325mm H 250mm	200 Single Phase	12	4.1	50/60	48 Three Phase	36.0	3.0	160-240	3	11.1
FC-4N	L 792mm W 350mm H 440mm	380 Three Phase	11	7.3	50/60	48 Three Phase	46	3.8	200/240	3	73.0

 

 

FG-200V	FG-300VR

 

[Specification for High Cycle Internal Concrete Vibrator]

Model	L x W x H (mm)	Output (KVA)	Output (V)	Output (A)	Cycle (Hz)	Receptacles	Power Sorce	Weight (kg)
FG-200V	L 475mm W 394mm H 448mm	1.9	48 Three Phase	22.9	240	2	Robin EH12-2D max.output 2.6kW(3.5PS)	34.1
FG-300VR	L 580mm W 455mm H 530mm	3.1	48 Three Phase	37.2	240	3	Robin EH25-2D max.output 5.9kW(8.0PS)	53.4

TOP

 

	New vibrating head:Head is devided into 2 piece configuration. Head cap can be separately replaced with new one. If is not needed to replace with all head case complete. It reduces maintenance cost for replacement in the event. There are still compatibility between new head cap with case (B-type) and current head case (A-type) as a set.

 

 

VH-32B/VC-1A

VH-42B/VC-2B

 

[Specification for Micro-computer Controlled High Cycle Concrete Vibrator]

Model	Vib.head dia. x length	Rubber hose	Voltage	Cycle	Input (KVA)	Amplitude	Vibration	Cable length	Weight(kg) 4m/6m
VH-32B	32 x 356mm	4 or 6m	58V	400Hz	0.3	1.7mm	200Hz (12,000V.P.M)	15m	9.0/10.1
VH-42B	43 x 327mm	4 or 6m	58V	400Hz	0.5	2.0mm	200Hz (12,000V.P.M)	15m	10.7/12.2
VH-52B	52 x 347mm	4 or 6m	58V	400Hz	0.7	2.3mm	200Hz (12,000V.P.M)	15m	11.8/13.7
VHB-32B	32 x 1.688mm		58V	400Hz	0.3	1.7mm	200Hz (12,000V.P.M)		11.4
VHB-42B	43 x 1.723mm		58V	400Hz	0.5	2.0mm	200Hz (12,000V.P.M)		14.6

 

 

VC-1A

VC-1AII

 

[Specification for Micro-computer Controlled High Cycle Concrete Vibrator]

Model	Dimensions	Input (V)	Input (A)	Input (KVA)	Input (Hz)	Output (V)	Output (A)	Output (KVA)	Output (Hz)	Receptacles	Weight (kg)
VC-1A	L 300mm W 220mm H 220mm	100 Single Phase	10	1.0	50/60	58 Three Phase	7.0	0.7	400	1	5.1
VC-1AII	L 380mm W 275mm H 240mm	200 Single Phase	5	1.0	50/60	58 Three Phase	7.0	0.7	400	1	13.8

 

 

[Specification for Micro-computer Controlled High Cycle Concrete Vibrator]

Model	L x W x H (mm)	Output (KVA)	Output (V)	Output (A)	Cycle (Hz)	Receptacles	Power sorce	Weight (kg)
VG-200V	L 550mm W 428mm H 450mm	1.4	58	14	400	2	Robin EH12-2D max.output 2.6kW(3.5PS)	43.0

TOP

 

	MGX type portable multi-purpose concrete vibrator has a new motor of front end closed type with a new cooling system allowing enhanced by covering the switch to eliminate trouble due to otherwise entering mortar.
	MGX type portable multi-purpose concrete vibrator is extremely safe against leak accident as it employs a double insulation type motor. Its body being of engineering plastic that is hard to break even dropped, it is not only light weight but mortar is unlikely to get on, for easy service.

 

 

MGX-28(1.5m)	MGX-28	MGZ-32

 

 

	Less load fluctuation, but, Strong and effective vibration.
	Pendulous structure (planet rotation) makes one-third rotation of flexible shaft compared to head portion. Leverage advantages.
	With its strong and lower maintenance, GH series are suitable for a variety of application like building, foundation, dam construction and others.

 

 

GH Concrete Vibrator
	GE-5LE	GE-5BE

 

[Specification for Pendulous Concrete Vibrator GH series]

Model	Vib.head dia. x length	flexible shaft dia.	Rubber hose dia	Rubber hose	Amplitude	Vibration	Weight (kg)
GH-28S	28.5 x 477mm	9.5mm	31mm	4 or 6m	1.4mm	150Hz-208Hz (9,000-12,500V.P.M)	4m 10.6 6m 14.7
GH-32S	32 x 520mm	9.5mm	31mm	4 or 6m	1.8mm	150Hz-208Hz (9,000-12,500V.P.M)	4m 11.2 6m 15.1
GH-38S	38 x 480mm	9.5mm	31mm	4 or 6m	1.8mm	150Hz-208Hz (9,000-12,500V.P.M)	4m 11.9 6m 15.7
GH-45S	45 x 494mm	9.5mm	31mm	4 or 6m	2.0mm	150Hz-208Hz (9,000-12,500V.P.M)	4m 13.3 6m 17.4
GH-62S	60 x 479mm	12.7mm	32mm	6m	2.4mm	150Hz-208Hz (9,000-12,500V.P.M)	6m 23.5
GH-70S	72 x 366mm	12.7mm	32mm	6m	2.3mm	150Hz-208Hz (9,000-12,500V.P.M)	6m 21.4

 

 

[Specification for Power Drive Unit]

Model	Power source	Weight (kg)
GE-5LE	Robin EX17D max.output 4.2kW(5.7PS)	28.0
GE-5LD	Robin DY23D max.output 3.7kW(5.0PS)	50.0
GE-5BE	Robin EX17D max.output 4.2kW(5.7PS)	30.0

• Home    |
• Products and Services    |
• Highlights and Events    |
• Contact Us