PRODUCTS

<< Back
CONCRETE SCREEDS & STRAIGHT EDGES
FIXED POSITION HANDLE SCREEDS
F15 Traditional 50 x 36 aluminium box section with one radius and one sharp cutting edge. The handle fixes to the top of the screed. Fitted with end plugs and powder coated for ease of clean up.
Tool
Length(mm)
F12 1200
F15 1500
F18 1800
F21 2100
F24 2400
F27 2700
F30 3000
F36 3600
VARIABLE POSITION CLAMPED HANDLE SCREED
C15 'Clamp on' style handle, which may be reversed to the working face for second use. Fitted with end plugs and powder coated for ease of clean up.





NB: Size 4200 to 4800 may not be sufficiently rigid for close tolerance work.
Tool
Length(mm)
C12 1200
C15 1500
C18 1800
C21 2100
C24 2400
C27 2700
C30 3000
C36 3600
C42 4200
C45 4500
C48 4800
LIGHT WEIGHT ALUMINIUM STRAIGHT EDGE
P15 Light weight accurate straight edge - measures 70 x 19. Uses include ruling cement render, tiling and as a general construction straight edge. Fitted with end plugs and powder coated for ease of clean up, or in mill finish.
Length
Mill
Finish		 Powder
Coated
(mm) (Plain) (White)
1200 P12P P12
1500 P15P P15
1800 P18P P18
2100 P21P P21
2400 P24P P24
2700 P27P P27
3000 P30P P30
3600 P36P P36
CLAMP ON SCREED LEVEL BUBBLE
LB CLAMP-ON SCREED LEVEL BUBBLE TOOL: LB

Clamps onto fixed (or variable position) handle screeds.

NB When fitting the level bubble, it is important to ensure that the bubble is parallel to the working face of the screed. This may be achieved by comparing to another level or by levelling two points at the screed ends and then reversing the screed to compare the reading.

<< Back